It has a certain degree of toughness, is soft and non cutting, and is used to clean burrs and overflow glue on the surface, holes, and recesses of plastic, electric wood, resin and other products, without damaging the workpiece, and has a very long service life. You can choose the color of nylon sand for edge treatment according to the different colors of the product
Deburring Nylon CL Series
Nylon sand: It has a certain toughness, is soft and non cutting, and is used to clean burrs and overflow glue on the surface, holes, and recesses of plastic, electric wood, resin and other products. It does not damage the workpiece and has a long service life. You can choose the color of nylon sand for edge treatment according to the different colors of the product, with commonly used ones being white and red. The company utilizes advanced foreign technology, equipment, and unique technological innovations to process cylindrical microparticles using polyamide monofilament, which are uniform in size, neat in cross-section, anti-static, strong, tough, and wear-resistant.
Colored cylinder:
We provide you with a variety of multi-color plastic nylon sand PA-PC-PG for you to choose from
PA is mainly used for rough edge treatment of thermosetting plastic products
PC is mainly used for rough edge treatment of metal products
PG has a high hardness and is mainly used for cleaning burrs during low-temperature freezing.
UKII-2 type is a polygonal angular fine abrasive with certain hardness and density, with a product specification range of 40-80 mesh (can be adjusted according to customer special requirements). In a flexible and fixed sandblasting operating system, it does not damage the surface substrate of electronic components and boards and quickly peels off surface attachments.
Widely applicable temperature range, abrasive does not produce toxicity during application, and is environmentally friendly. Has strong anti friction and anti-static capabilities.
Widely used in the electronic industry for sheet metal and components.
MKII-1 type is a polygonal angular abrasive with better hardness and density, with a product specification range of 8-16 mesh (adjustable according to customer specific requirements). Under specific sandblasting conditions and flexible operation control systems, it does not damage the inner wall of pipelines and the base of containers, and quickly peels off corroded attachments.
MKII-1 type is a polygonal angular abrasive with good hardness and density, with a product specification range of 20-40 mesh (can be adjusted according to customer special requirements). According to the characteristics of rubber varieties, it can cut the burrs and attachments of rubber and plastic products in a flexible operation control system.
Widely applicable temperature range, abrasive does not produce toxicity during application, and is environmentally friendly. Has strong anti friction and anti-static capabilities, and good flame retardancy.
Widely applicable temperature range, abrasive does not produce toxicity during application, and is environmentally friendly. Has strong anti friction ability.
Widely used in pipelines, containers, pharmaceuticals, and food industries in the petrochemical industry.
Widely used in the cutting of burrs and removal of peeled off materials in rubber and plastic products.
Resin sand plastic abrasive plastic sand polymer plastic abrasive
MKII-2 is a polygonal angular abrasive with good hardness and density, with a product specification range of 30-50 mesh (adjustable according to customer specific requirements). Under specific and fixed conditions, it is cut using flexible methods in a controllable operating system without damaging the surface substrates of various metal objects.
Widely applicable temperature range, abrasive does not produce toxicity during application, and is environmentally friendly. Has strong anti friction and anti-static capabilities, and good flame retardancy.
Widely used in the cutting of metal parts such as motor vehicles and molds, as well as the removal of attachments. Resin sand plastic abrasive plastic sand polymer plastic abrasive
Main technical indicators of the project: Type II, Type III, chlorine content%, trace 1%, trace 1%, pH value 4-8PH4-8PH, conductivity us/cm100us/cm100us/cm, water absorption rate% 10.0% 10.0% bulk density g/cm30.6-0.7 g/cm30.6-0.7 g/cm3, color white or mixed particles of multiple colors, white or mixed particles of multiple colors, Pasteur hardness HB a54-62 HB a64-72 HB a, infrared spectroscopy qualitative analysis, urea formaldehyde resin, melamine resin, paint removal rate (square feet/minute) 0.15 square feet/minute 0.15 square feet/minute proactivity (milligrams/square centimeter) 0.50 milligrams/square centimeter 3.00 milligrams
